Bardahl revolutionizes car maintenance with its new DPF aerosol cleaner

An effective, no-disassembly solution for a consistently high-performance particle filter

Bardahl, a recognized expert in the field of additives and automotive care, announces the launch of its all-new DPF Cleaner in a 600 ml aerosol can with a 100% recyclable cardboard cap. This innovative product effectively dissolves and removes soot particles and ash from the particulate filter (DPF) without the need for disassembly.

Thanks to its advanced formulation, Bardahl DPF Cleaner eliminates power loss and limits excess fuel consumption, offering drivers a practical and effective solution for vehicle maintenance.

Simplified use for optimal results

Bardahl DPF Cleaner is designed for quick and easy use. In case of filter clogging, simply:

• Shake the aerosol can.
• Remove the differential pressure sensor (engine compartment) or the hose directly upstream of the DPF.
• Start the vehicle with the engine idling.
• Insert the extension towards the DPF.
• Completely empty the aerosol can.
• Accelerate the engine to 2,500 rpm for 5 minutes, then turn it off.
• Reconnect the vehicle in its original configuration.
• Take a road test to initiate a dynamic or static regeneration according to the manufacturer's recommendations.
• If necessary, clear the fault codes with a diagnostic tool.

If the filter becomes clogged, simply:

• Inject the entire product with the engine stopped,
• Let it sit for 10 minutes,
• Then follow the procedure indicated on the aerosol can, starting with step 6, to complete the cleaning.

For optimal results, the procedure should be performed with the engine cold or when the exhaust system is below 150°C.

Bardahl expertise at the service of automotive performance

With this new DPF Cleaner, Bardahl continues to innovate by offering high-performance and affordable solutions to drivers concerned about the maintenance and longevity of their vehicles.

Available at auto centers and wholesalers for professional use.