Clean your bike like a pro

• Two sponges: one for the transmission (dirtier) and one for the bike frame.
• Degreaser for transmission and chain (600m1 chain degreaser or bio chain degreaser spray)
• Cloth rags for the chain and a multi-purpose wipe for the frame.

• Degrease using the "chain degreaser" spray, starting with the cassette (rear sprocket), while turning in the opposite direction with the pedals.
• Next, apply the degreaser to the chain and drivetrain, but be careful of splashes! Also have some absorbent paper or cloth ready.
• Dry with a cloth. After a few seconds, the degreaser has completely evaporated.
• Once this operation is completed, apply the Anti Friction oil 60 ml bottle or the Chain Lubricant.
• After an hour or just before the ride, rub the chain with a clean cloth for best results.

What products to use?

Organic chain degreaser

• BARDAHL Chain Cleaner is a powerful degreasing cleaner for the chain and derailleur.
• Regular application protects the chain, the derailleur and facilitates gear changes.

Chain degreaser

• Fast and powerful degreaser for chain, derailleur and disc brakes.
• Quick drying.
• Regular application prevents clogging of the chain and derailleur, which optimizes and prolongs its operation.
• Does not corrode rubber or elastomers.

Chain lubricant

• Contains synthetic additives to achieve reduced friction resistance, easier gear shifting, reduced wear and extended lubrication life.
• Resists water and extreme temperatures.
• Can be used in all weather conditions.

On brake calipers and small mechanisms, apply Bardahl Multi-Function Lubricant.
Be careful, be very careful when applying to the calipers, especially do not apply to the pads or discs.

What product to use?

• Multispray 50 is a multi-purpose lubricant degreaser consisting of a synthetic base oil and a powerful corrosion inhibitor system.
• Penetrates deep.
• Cleans and dissolves residues (oil, grease, tar) without leaving deposits.
• Protects against moisture, oxidation, and corrosion by covering the surface with a light oily film.

The silicone polish is applied to the frame once it is clean and dry.

To save time, you can dry it using a small air compressor or a Bardahl compressed air spray. Make sure that there is no water left on the parts (to avoid rust).

So be sure to insist on the head tube, the bottom bracket and the brake calipers. The wheel hubs are particularly prone to this kind of small problem.

What product to use?

Silicone polish

• Polish / Silicone is a high quality polishing spray.
• It protects and shines matte or glossy frames (painted or varnished surfaces).
• Water and dust repellent effect.